星坤电子

Company News

NEWS

Brand switch Xingkun company, to provide customers with solutions for different body temperature guns

Release time:2020-05-11 Authoor: Hits:

Affected by the epidemic, staff holding handheld infrared temperature detectors can be seen everywhere in subway entrances, company entrances and community entrances. Following the masks, the output of this industry is also growing at a high speed.Brand switch Xingkun company, to provide customers with solutions for different body temperature guns

It is actually relatively simple to assemble an infrared temperature measuring gun, which is a plastic case plus a circuit board. But if you want to go deeper in the upstream of the industrial chain of the temperature measuring gun, you will find that the core device on the circuit board has infrared sensing, there is a wafer in the infrared sensor, and there is a packaging process between the wafer and the infrared sensor. Packaging will involve The entire supply chain of filters, tubes and other raw materials is very long and complicated. Infrared body temperature detector has the characteristics of non-contact, high efficiency and convenient use. Its temperature measurement principle is to convert the radiant energy of infrared rays emitted by an object into an electrical signal, and then determine the temperature of the object according to the size of the converted electrical signal. Infrared thermometers are widely used in many fields such as military, medical, engineering construction, equipment maintenance and so on.


Next we disassemble a body temperature gun and look at the internal electronic components




Brand switch Xingkun company, to provide customers with solutions for different body temperature guns

(Distribution diagram of internal electronic components of body temperature gun)


For this type of product, our company also recommends two products in production


Brand switch Xingkun company, to provide customers with solutions for different body temperature guns

Product model: TS-1102S-X-X-X


Type: touch switch


Installation height (mm): 3.5


Installation method: SMD


Mode of operation: vertical


Stroke type: 0.25 ± 0.05mm


Support frame: without belt


Dimensions: W6.0 * D6.0

Brand switch Xingkun company, to provide customers with solutions for different body temperature guns

Product model: TS-1187A-X-X-X


Type: touch switch


Installation height (mm): 1.5


Installation method: SMD


Waterproof level: waterproof


Mode of operation: vertical


Stroke type: 0.15 ± 0.05mm


Support frame: without belt


Dimensions: W5.2 * D5.2


Operation feeling: sensitive


Lichuang agent purchase link: https://so.szlcsc.com/global.html?k=TS-1102S


Lichuang agent purchase link https://so.szlcsc.com/global.html?k=TS-1187A


Tact switches are very common in electronic products. They have good fixing performance and a certain temperature resistance function of the base. They are all individually welded on the PCB board. They can be said to be very strong in terms of fixing and have certain protection. The ability to apply pressure on the switch can achieve electrical switch control and function menu selection, which is very convenient. As shown in the picture above are the commonly used models of temperature guns. Two touch switches, TS-1102S series and TS-1187A series, are a large number of our long-term stock products.